Advancing images in edit mode still stalls


Home Forums Nitro for Mac Advancing images in edit mode still stalls

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #136778
    David Kumin
    Participant

    I can edit two or three images before the blue outline appears and Nitro won’t advance to the next image. Have to leave edit, go to full thumbnail overview and load the next one, and proceed that way until it goes away, and then returns. Very frustrating and work flow killer. MBP M1 Pro, 15.3.1, Nitro 2025.02 (77). Is there a fix or workaround I missed?

    Thanks.

    #136829
    Nik Bhatt
    Keymaster

    Sorry to hear about this issue. What blue line are you referring to? Is it around the viewer? If you click on a thumbnail, are you able to advance to the next image?

    #136886
    David Kumin
    Participant

    Thanks, Nik. The blue outline looks like the outline of a thumbnail when it is selected, but it happens in edit mode with the large image viewed. When the blue outline appears on that image view, advancing to the next image with arrow keys stops. If you show the thumbnails across the bottom, you can manually go to the next one IIRC, but cannot move in either direction with the arrow keys. One has to leave edit mode, double click on the image to be taken to the layout that shows the whole folder’s thumbnails and manually click on another image. Sometimes this will open without the blue outline, sometimes this image has it also. A few times doing this clears it so that the image being worked on in edit mode does not have the outline, and it continues working until it happens again, sometimes 3 sometimes 23 images later.

    #136939
    Nik Bhatt
    Keymaster

    OK. Do you have any idea of what steps are required to cause the blue outline around the large image (the “viewer”)? There was a bug in the past with that, but I fixed it. Sounds like there is another case, but I have not seen it.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.