Raw Power on ARM-based iMac

Home › Forums › RAW Power for macOS General Discussion › Raw Power on ARM-based iMac

Tagged: ,

Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 4, 2020 at 11:02 am #90012
    Erik Brammer
    Participant

    Hi Nik,

    I was going to buy a new iMac as soon as it was going to be announced this summer. Today is that day, but now I am thinking I might as well wait for an ARM-based iMac >= 27“ which I would expect to be released in 2021, and carry on with my humble late 2009 iMac. 🙂

    My question to you: Will Raw Power work on ARM-based Macs? If so, natively or through Rosetta 2?

    Best regards,
    Erik

    August 4, 2020 at 11:38 am #90026
    Nik Bhatt
    Keymaster

    RAW Power will be native on the ARM Macs. I have one of Apple’s DTK units, so I have been able to build and test RAW Power on an ARM-based Mac (it required no changes).

    August 4, 2020 at 11:56 am #90038
    Erik Brammer
    Participant

    Cool, thank you, now let’s hope that the performance will be fine with released OS and HW.

  • Author
    Posts
Log In Register Lost Password
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.