Sliders at max values become unresponsive

Home › Forums › RAW Power for iOS General Discussion › Sliders at max values become unresponsive

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 14, 2019 at 10:02 am #10266
    davidk
    Participant

    Rawpower on iOS 12.1.2, on iPhone SE.

    When editing a RAW image (taken with Halide) the RAW adjustment sliders work fine, until you set one at 1.0 (or whatever the max is) and let go of the slider. It then gets stuck at that point and can’t be brought back (ie can’t be re-selected).

    This is a particular issue with Boost with defaults to 1.0 and thus can’t be adjusted at all.

    January 15, 2019 at 5:51 pm #10326
    Nik Bhatt
    Keymaster

    Thank you for reporting that. I will try to reproduce the problem and get back to you.

    January 15, 2019 at 6:26 pm #10328
    davidk
    Participant

    Thanks Nik – it seems an intermittent issue … it’s working now but I’ll try and work out if there is a situation that triggers it.

    January 15, 2019 at 9:57 pm #10348
    Nik Bhatt
    Keymaster

    It may also depend on where you touch the control. For example, if the control is at the far right edge, it’s easy to place your finger on the right edge of the device (but not actually over the control). If that happens, then the drag won’t be detected.

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.